The first pair is a glowing red Christmas tree bead framed with a diamond cut silver ring.
For this project you'll need:
- 2 x 32mm silver diamond cut ring
- 2 x red Christmas Tree bead
- 2 x green marguerite beads with hole across the top
- 2 silver earring wires
- 2 silver head pins
- 22 gauge silver wire
- 2 x 4mm silver jump rings
- tools: flat nose pliers, round nose pliers, flush cutters
Wrap the shorter wire around the neck twice and trim it flush with the neck.
Using round nose pliers, form a loop about 2-3mm above the first part of the wrap. Hook it onto the silver ring.
Wrap the wire around the neck until it meets the first part of the wrap. Trim away the excess wire.
Thread the Christmas Tree bead on a head pin. Leave a small neck and create a loop. Hook it onto the silver ring and complete another wrapped loop.
Use a jump ring to connect this loop to the earring wire and make another earring to match.
I hope you enjoyed this tutorial. Check back in a couple of days for another pair of Christmas earrings.